Wolfsoft PINbrawl Project » led-modding

Balltop milky white with RGB-LED

Wolfsoft — Thu, 29 Apr 2010 12:40:33 +0000

today I received the balltop for my Sanwa JLF-TP-8YT Stick.

Here you can see a milky white balltop 37,5mm diameter with 6mm insert for use in arcadesticks.
You will find a RGB-Led inside for make all colours you wish

On the left site you will see a standard red balltop.

In the middle the milky one, right the milky one with LED on:

Video

blue Power LED for NES

Wolfsoft — Wed, 28 Apr 2010 14:35:59 +0000

today I done a LED mod for a NES.
Its easy, the most difficulty is to open and remove all screws.
You must remove the mainboard to get the Power LED PCB.
Remove the original 5mm LED and replace with a color you like.
Look here:

Balltop with 5mm RGB-Led

Wolfsoft — Tue, 15 Dec 2009 16:30:53 +0000

I used a 5mm LED for RGB-Balltop of Sanwa Stick.

Advantage: more powerfull as the PLCC4 or SMD 605 Led

balltop, led, shaft

you have to remove the ring of the led

after removing the ring

difference with ring and without

cutted legs

wires black is 5V, red, green and blue needs GND to lite

including shrinking

moved into shaft

frosting the led for diffusing the light

frosting led

red

green

blue

white" width="300" height="225" />

all leds on -> white

RGB-Led for Sanwa JLF-TP-8YT Stick

Wolfsoft — Tue, 06 Oct 2009 12:46:58 +0000

Hi there,

for having fun with the great Sanwa Sticks I want to use a transparent Balltop and a Stick with a hole.

Thanks to luigi for the necessary hardware.

If you want to make it lid RGB you are in need of some SMD Led´s. First I tried SMD 605 (small Leds) but now I will try the bigger one called PLCC-2 DMX RGB-Leds.

pinout plcc2-rgb

IF=20mA, Red=2,0V; green=3,5V; blue=3,6V

-> Rred=150Ohm; Rgreen=125Ohm; Rblue=120Ohm @ 5V

You need 4 wires and shrinking tube.

plcc2-dmx

(in real)

heatshrink tube

(shrinking tube 2 sizes)

final position of rgb-led