And it works great

left old uwrc Controller NES, right new NES Mini Controller

you need to remove this here and make the led hole bigger and as usual the opening for the usb connector for loading

today it’s time to make amiga upcb working.

In the original Document of neogeo.h the +5V at older Videogame Systems are defined at Pin 5 of the SUB-D 9 pin Connector, but for amiga it’s wrong: Here we can find it at Pin 7 of SUB-D 9 pin Connector.

Amiga Pinout

Amiga

Pin Description

1 UP (brown)
2 Down (red)
3 Left (orange)
4 Right (yellow)
5 (green)
6 Button 1 (blue)
7 +5V (purple)
8 GND (grey)
9 Button 2 (black)

Sub D 15

Pin Description

1 8 (GND) grey

2

3

4 9 Button 2 (black)

5 6 Button 1 (blue)

6 4 Right (yellow)

7 2 Down (red)

8 5 (VCC 5V) (purple)

9 Low

10

11

12

13

14 3 (Left) orange
15 1 (Up) brown

Buttons1

Buttons

If no Buttons are working. Try to press the 3 grey Buttons at powerup or
Press the three green Buttons at powerup

here you can find how to a padhack for the original DC Pad including making of the DC-Cable for it.

Buy upcb

Ordering Dreamcast Pad for Padhack

Ideal XBOX360 Pad for Padhack

Padhack:

Piggy Connector Pinout

DC 1 Pin 1 (red)

GND  Pin 3 (black)

DC 2 Pin 5 (white)

Pictures:

Wiring Points

Wiring in Detail1

Wiring in Detail2

Wiring in Detail3

Dreamcast Cable:

Pictures of Sub-D 15 pin male:



soldering 

DC Pinout

DC-Connector CN1 		Sub-D 15 pin male: 

Pin	Description		Pin	Description

1	Serial A   (red)	1	3 (GND)

2	VCC +5V (blue)	2	Low

3	GND      (black)	3	Low

4	Sense     (green)	4	High

5	Serial B  (white)	5	High

                            6	Low

                            7	Low

                            8	2 (VCC +5V)

                             ______________________

                            9	NC - 

                            10	High

                            11	High

                            12	NC - 

                            13	1 Serial A (red)

                            14	5 Serial B (white)

                            15	Low

It is the 3rd extionscable I was using.

Dedicated Digital Playstion cable for UPCB

Playstation

]]> http://wolfsoft.de/wordpress/?feed=rss2&p=103 0 http://wolfsoft.de/wordpress/?p=91 http://wolfsoft.de/wordpress/?p=91#comments Fri, 16 Oct 2009 14:09:02 +0000 http://wolfsoft.de/wordpress/?p=91 I currently trying a PC-Engine Cable but it didn’t work

testing with: 2 differnt ucpb rev 2.1 Software 2.5 BP

Have checked both a white pce and a jap. Duo Engine.

Here is the wiring

Checked the VCC and Gnd with a Multimeter

Start: Stick is reported to D-pad only instead of both D-pad and left analog
Select: Stick is reported to left analog only instead of both D-pad and left analog
Strong+Forward: Smash Brother Basic mode
Fierce+Roundhouse: Smash Brothers Advance mode

Pictures of Sub-D 15 pin male:

Look into Gamecube socket

Pin Description GameCubePort

1 VCC 5V (green)

2 Data in (yellow)

3 GND (blue)

4 GND (red)

5 – (white)

6 3,43 V (black)

7 gnd (shield)

Sub D 15 pin

1 4 (GND) blue, red, shield

2 Low

3 Low

4 Low

5 High

6 Low

7 Low

8 1 (VCC 5V) green

______________________

9 NC –

10 High

11 High

12 NC –

13 NC –

14 2 (Data) yellow

15 High

USAGE in DETAIL

1. Default [automatic if you didn’t select any other mode] Stick gets reported to both right analog and d-pad. Select is Z, Start is start, and the layout is:
YXL
BAR
2. D-pad only [hold Start when plugging in.] Same as default, but the stick is only reported to the d-pad. Right analog always in neutral.
3. Analog only [hold Select when pluggin in.] Same as default, but the stick is only reported to the right analog stick. D-pad is always in neutral.
4. Smash Bros. Basic [hold Strong and Forward when plugging in.] 2,6 (A,X)Short is shield, Jab is A, Strong is B. Double tap a direction to dash. A+B+Direction does a smash attack using the C stick. Select is a dpad down taunt.
5. Smash Bros. Advanced [hold Fierce and Roundhouse when plugging in.] Buttons same as Smash Bros. Basic, but include forward as ‚jump‘ (just the Y button), fierce as ‚run‘, and roundhouse as ‚lock‘. Shield button will do a half-pull on the trigger with no click unless the ‚run‘ button is pressed as well; then it will do a full pull with click so you can choose which type of shield you need for hit recovery, L-cancelling, whatever. ‚run‘ button also makes the analog stick report as all of the way in the direction you want, instead of just a little bit, so you can choose to walk or run, tild or smash.’lock‘ button is for complex C-stick manuevers. It locks the analog stick where its at, and your stick will control the C-stick until you release the lock button. So, to do Peach’s floating b-air, jump and hold up on your stick, hold the lock button, and move the stick to the left or right.

First we have to make the pcb working. Two 4,67k on the botton are not neccasary

for playing x360 with the universalpcb you will need to hack a x360 Pad.

We use a MadCatz Arcade Gamestick Item#4758.

picture of arcade gamestick

It will be easy to hack, because you will need no inverting the R-Trigger and L-Trigger Buttons, it’s cheap, you can solder directly to the buttons and it’s common Ground.

We have some in stock: here

You have to dissassemble the complete pad including the R-Trigger and L-Trigger Potis.

XBOX360_1 D- (white)

XBOX360_2 D+ (green)

Frontside of the MadCatz Pad

frontside including Wires

Backsite including Resistors 10k