„Simba“ LED Mod for Cirqus Voltaire Pinball

I found Panther called simba for placing it in a Cirqus Voltaire Pinball. As there is one displayed on the playfield it fits to the main theme.

If you want a Simba including this eye led mod you can order it here:

http://www.wolfsoft.de/shop/product_info.php/products_id/14872

or sent me an email to klaus@wolfsoft.de and I will take care of you order. Please sent me your complete adress for checking the shipping costs.
Here you can see how I add the green LEDs to the eyes.
I used a 2,5mm Drill and 3mm LEDs in green for the eye replacement. The installation is done solderless with the „croco“ connectors to the 28 bear playfield flasher with two 680 Ohm Resistors.

Drill 2,5 extra long into the
simba_making_off_01

to get the cables out of the panther use a drill from downsite 8-9mm in diameter:

two green leds 3mm:

simba_making_off_03

eyes pushed into the eye holes

simba_making_off_04

connector to get the cables though the playfield without soldering

simba_making_off_05

(the resistors are 680Ohm, because I saw too late it will not be connected not to a insert lamp. It will be connected to a flash-lamp)

first light up

simba_making_off_06

dangerous in the dark…

simba_making_off_07

with „croco“ connector to get it work at the flasher lamp

simba_making_off_08

Here you can see it @ work:

panther_green_on

simba_01

simba_02

simba_05

I vectorized the outline of the plastics needed for connect simba to the playfield
Here is the new plastic with holes for the simba

simba_replacement_plastic

connecting simba with two 2,5mm screws

simba_plastic_2

the third leg is sitting on the plastic with the flash

simba_screw_sitting_s

simba_alligator_s

simba_alligator_2_s

Installation Manual

Video:

Comments are closed.